Then, use the soldering iron to connect the two wires together. To splice an orange extension cord, use a wire stripper to strip the ends and clean the wire. However, you should never attempt to repair a snapped or bent plug. You can also try to straighten the prongs of an extension cord. You can either strip the plug or replace it. Most light-duty interior extension cords don’t come with a ground wire, so you have to connect it to the one at the base of the cord. Next, you need to find a suitable receptacle or plug. Once you remove the insulation, you can then strip the wires of the corresponding color and splice them together. To perform a splice, you first need to cut through the cord and strip the insulation. This may be a necessary repair or simply because you need a longer line. It’s not uncommon to have to splice an orange extension cord. This may work for temporary solutions, but it is not recommended because it will cause a fire or meltdown. Another alternative is stringing several extension cords together. Using tape is not legal, so don’t use it where the insulation has been compromised. It is recommended that you use electrical tape since it has low conductivity and is durable. Then, you can use electrical tape to splice the ends. If the plug has been broken, you’ll have to purchase a new one. If it is beyond repair, it’s safe to cut it and replace it. If the plug is damaged or snapped, you’ll have to buy a new one. If the prongs are bent or snapped, use pliers to straighten them.
If you are unable to repair the wire, you should consider buying a new extension cable.įirst, you need to strip the insulation of the cord. After making the repair, you must mark the area that needs to be repaired.
Use a circuit breaker or fuse if your cord has been damaged significantly. When working with live wires, you should always turn them off first before starting the repair.
#Splice extension cord how to#
In most cases, it is safe to cut and splice an extension cord if you know how to properly handle the tool. How Do You Splice an Outdoor Electric Cord?.How to Cut and Splice an Extension Cord.My splice power cord has never caused me problems. However, based on my experience, it is something I can do when I’m in a pinch and cannot find an intact cable. The NEC says we should not splice an electrical cord. It can be done by simply connecting the wires and insulating them. Splicing extension cords is a quick way to repair a cord that has been cut. How Do You Repair an Extension Cord that has Been Cut? You can try the method above for mending a cut power cord.Īlternatively, if your extension cable damage is on the plug part, you can splice plug and replace it with a new part.īut if your problem is a melted extension cord, I’m afraid you need a whole new one. Yes! You can repair a damaged extension cord as long as its wires are usable. Finally, put the heat-shrink tube over the connected wires and heat-blow it.Then, wait at least four hours for the liquid tape to dry based on its instructions.During the second coating, apply sealant along the edges where the outer jacket is removed.Wait 10 minutes for the coating to dry before applying another coat.Inspect the wire to verify you haven’t missed any areas.
0 kommentar(er)
